Power House Ice Eater Deicer | P750 Series


  • Voltage: 115V or 230V
  • Typically clears up to 60' diameter
  • Improves water flow with 4 de-icing patterns
  • Includes aluminum anode; 2 suspension lines and set of 2 shackles
  • 3 Year Warranty - Made in USA
  • For 10% off your deicer, enter ICEEATER at checkout
  (Minimum 5 units)
Our Price: $1,175.00
Free Shipping
Leaves warehouse in 1-2 business days
Item #:
Overall Product Rating:

Power House Ice Eater Deicers | P750 Series

Power House Ice Eaters quickly melt ice and prevent new ice from forming by driving warm water to the surface. These heavy-duty Ice Eaters feature a unique "flared shroud" that facilitates more efficient water flow. Designed for use in both saltwater and freshwater applications. All Powerhouse Ice Eaters are expertly crafted in the USA. NOTE: Use of extension cords is not recommended with de-icers, as it results in reduced performance and may damage the unit.

Quick Comparison Guide
Ice Eater ModelMotorVoltageStart Up AmpsRunning AmpsRunning kWhThrustTypical Cleared Area*
P250 1/4 HP 115V 5 2.5 0.30 20 lbs. 20' to 25' Diameter
230V 2.5 1.25
P500 1/2 HP 115V 10 5.0 0.58 28 lbs. Up to 40' Diameter
230V 5 2.5
P750 3/4 HP 115V 20 4.7 0.54 32 lbs. Up to 60' Diameter
230V 10 2.35
P1000 1 HP 115V 30 7 0.81 36 lbs. Up to 80' Diameter
230V 15 3.5
*Extreme winter conditions may result in a smaller open diameter.
  • Volt motor: 115V or 230V
  • Typically clears up to 60' diameter (cleared area may vary in extreme conditions)
  • Patented PVC outer design improves water flow and accuracy with 4 de-icing patterns
  • 25', 50', 100' or 150' power cords are oil and water resistant
  • Extreme duty power cords prevent loss of voltage as electricity passes from power source to deicer unit
  • Stainless steel motor shaft and housing with bronze end bell resist corrosion
  • Heavy-duty PVC custom brackets attach motor to shroud; All bolts and nuts are stainless steel
  • Includes aluminum anode; two 25' suspension lines and set of two shackles
Durability and Performance
  • Patented Venturi Styled Heavy-Duty PVC Housing Designed for Superior Water Flow and Protection
  • Performance certified tested for proper output and leaks before shipment
  • 316 stainless steel motor shaft and housing with bronze end bell to resist corrosion
  • Internal, heavy-duty, hard-faced mechanical seal with stainless steel components
  • Additional double lip shaft seal for extra protection
  • Two heavy-duty ball bearings provide support for the rotor while being cooled with dielectric lubricating fluid
Other Uses
  • Functions as a circulator to deter winter fish kills
  • Acts as an aerator in warmer months to minimize mosquito reproduction
  • Creates a current to avoid algae or debris buildup
  • Directs algae or debris to a designated area for easy collection
  • 3 year limited warranty - Best warranty in the market
Mounting Options
  • Two 25’ hollow braided polypropylene lines with ¼” stainless steel shackles come standard with every Ice Eater purchase
  • 50’ lines are available for an additional charge
  • Dock Mount
  • Shallow Water/Waterfowl Stand
Cord Lengths
  • Standard 25' water and oil resistant quick change cord with three-prong molded plug
  • Available cord lengths: 50', 100', 150'
  • 200' cord and above available for 230 volt only
Energy Efficient
  • Extreme duty power cords prevent loss of voltage as electricity passes from power source to Powerhouse Ice Eater
  • Permanent split capacitor ensures quick high torque and smooth operation, while producing the highest efficiency of a single phase induction motor
Low Maintenance
  • Power House servicing suggested every 4-5 years to ensure your Ice Eater is running at peak performance
  • Propeller screws on shaft for easy removal and replacement
  • Quick change power connection cord for easy on-site replacement
Environmentally Friendly
  • Uses synthetic dielectric lubricating fluid:
    • Non-toxic
    • Biodegradable
    • Non-bioaccumulating
  • Uses aluminum alloy anodes:
    • Does not have cadmium like zinc alloy
    • Best type of anode for all water types
Safety Tested
  • Motor exceeds NEMA specifications
  • UL and CSA compliant
  • CE certified
American Made
  • Each Power House Ice Eater is assembled in Owings Mills, Maryland from parts manufactured in the USA
Replacement Parts 
Prop 65 Warning
About Power House

Power House, Inc. was established in 1947 and has since developed a unique method of melting and preventing ice buildup around boats and piers. The original goal of Power House was to provide a dependable, affordable and efficient "insurance policy" for marinas, waterfront property and boat owners. Their mission is to produce the most dependable, energy-efficient products possible using the highest quality materials and environmentally friendly equipment.

You May Also Like...