Aluminum Fishing Boat Covers

About Aluminum Fishing Boats

Aluminum fishing boats are designed to be versatile and rugged. These boats work as well in shallow, difficult to navigate water as they do in deeper, rougher water. Smaller aluminum fishing boats can be easily transported on an automobile’s roof rack or in the bed of a truck. Aluminum fishing boats come in three basic styles: Jon boats, Mod-V and Deep-V. Jon Boats are built with a flat bottom and a blunt bow. These work well on rivers and small lakes. Mod-V style boats have low sides, but are designed with a sharper hull shape at the bow which allows them to navigate choppy water. Deep-V boats are designed with a more traditional outline. The bow comes to a point, there is more of a “vee” shape to the bottom and the sides are higher. These elements make this boat better suited for navigating choppy water.

Size: 8 – 24 feet

Propelled by: Outboard Engine

Top Manufacturers

Thunder Jet - Tracker - Duckworth - Alumacraft - Northwest - Starcraft Marine - Lund - Sylvan

How to Measure Your Boat For A Cover

Before purchasing aluminum fishing boat covers, it's extremely important to measure your boat properly to ensure you have accurate dimensions. Ordering the wrong size fishing boat tops can lead to poor performance, premature wear, bagging and sagging, and overall frustration when trying to put it on your boat. But measuring your boat is quick and easy if you follow our helpful instructions!

1. Measure the centerline length
   Measure from the tip of the bow to the center of the stern in a straight line without measuring up or around obstacles.
2. Measure the beam width
   Measure your boat side-to-side in a straight line at the widest point (outside to outside), without measuring up or around obstacles.
3. Additional tips
   • Don't rely on the owner's manual to provide accurate measurements
   • Be sure to include the entire length, factoring in the dimensions of any additional features such as a trolling motor, center console, jack plate, aftermarket pulpit, anchor davit or swim step.*
   *If you have a swim step, measure for the length of the step only. You can add this length to the centerline length for your boat cover, or keep it separate if you intend to buy a separate swim step cover.

Want to see how to measure your boat? Check out this quick video from SavvyBoater.

Which Fabric Should I Choose?

Aluminum boat covers are made from a variety of fabrics, including acrylic, polyester, cotton, and mixed blends. You should always choose a fabric that is best suited for the climate where it will be used.

• High Humidity:
  Choose a fabric with high breathability and mildew resistance ratings.
• Heavy Rain and/or Snow:
  Choose a fabric with a high water repellency rating.
• Hot and/or Dry:
  Choose a fabric with high UV/fade resistance and colorfastness ratings.

If you plan to trailer your boat with the cover, choose a fabric with a high durability rating.

Rating Scale: 5 = Premium | 4 = Very Good | 3 = Good | 2 = Fair | 1 = Poor