Garelick Over Platform Telescoping Boat Ladder
Steps telescope closed and fold over flat on top of the platform for compact stowage. To use the boat ladder, simply fold the ladder over and the steps telescope easily down into the water.
- Ladder Material: Electropolished stainless steel
- Step Material: Flat poly treads
- Mounting: Top of swim platform
- Stowage: Telescopes up and folds over flat on platform
- Mount Attachment: Folding gudgeons (mounting brackets)
Boat Ladder Dimensions
2 Steps
| 11.38"W x 23.5"L
| 11.38"W x 13.5"L x 1.25"H
| 5.75"
|
3 Steps
| 11.5"W x 34.4"L
| 11.5"W x 14.5"L x 1.25"H
| 5.83
|
Measure for Fit
Locate the area of your swim platform where it will be best to mount your ladder. Measure the top of where you will be mounting the ladder to the top of the waterline and compare it with the length of the ladder to determine how far (or how many steps) the ladder will extend below the waterline. The more steps below the waterline the easier it will be to board.
For the width, measure the available width clearance where you will be mounting the ladder. Be sure to take in account the boat motor or any other accessories you will have on the stern of your boat. This will let you know the maximum width available for mounting your ladder.
Important Note
Backing plates or large washers are strongly recommended for all ladder installations. They will help distribute the load over a larger area to avoid potential damage. In some instances failure to use a backing plate may void the manufacturers warranty.