*If you have a swim step, measure just for the length of the step. You will add this length to the centerline length or keep it as a separate measurement for covers that fit the swim step.
|
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Fabric Name |
Breathability
|
Water Repellency
|
Mildew Resistance
|
UV/Fade Resistance
|
Colorfastness
|
Durability
|
Warranty (years)
|
Overall Rating
|
||
| ACRYLIC
FABRICS |
Sunbrella |
5
|
4
|
5
|
5
|
5
|
5
|
10
|
4.83
|
|
| POLYESTER
FABRICS |
SunDura | 4 | 4 | 5 | 5 | 5 | 5 | 7 | 4.67 | |
| Sharkskin Supreme | 4 | 5 | 4 | 4 | 4 | 5 | 7 | 4.33 | ||
| Performance Poly-Guard | 5 | 4 | 5 | 4 | 4 | 5 | 5 | 4.50 | ||
| Poly-Flex | 5 | 4 | 5 | 3 | 4 | 4 | 2 | 4.17 | ||
| Mossy Oak® Camouflage | 5 | 4 | 5 | 4 | 3 | 4 | 5 | 4.17 | ||
| Sharkskin Plus (acrylic coated polyester) | 3 | 4 | 4 | 4 | 3 | 4 | 5 | 3.67 | ||
| Sharkskin | 3 | 3 | 3 | 3 | 3 | 3 | 3 | 3.00 | ||
| COTTON
FABRICS |
Double Duck (cotton/poly blend) | 5 | 3 | 3 | 3 | 4 | 4 | 3 | 3.67 | |
| Boat Duck | 5 | 3 | 3 | 3 | 4 | 3 | 1 | 3.50 | ||
Rating Scale: 5 = Premium | 4 = Very Good | 3 = Good | 2 = Fair | 1 = Poor
| Cold & Dry | Intense UV | Hot & Dry | Saltwater | Humid | |
|---|---|---|---|---|---|
| Sunbrella | ✔ | ✔ | ✔ | ✔ | ✔ |
| SunDura | ✔ | ✔ | ✔ | ✔ | ✔ |
| Poly-Guard | ✔ | ✔ | ✔ | ✔ | ✔ |
| Poly-Flex | ✔ | ✔ | ✔ | ✔ | ✔ |
| Sharkskin Supreme | ✔ | ✔ | ✔ | ✔ | ✔ |
| Sharkskin Plus | ✔ | ✔ | ✔ | ✔ | |
| Sharkskin | ✔ | ✔ | |||
| Double Duck | ✔ | ✔ | |||
| Boat Duck | ✔ | ✔ |
Keep your boat cover from sagging and collecting snow and water build up that can cause tearing, mold and mildew. Even fabrics recommended for humid environments will need extra ventilation.
| Standard Support Pole | Vented Support Pole | Strap Support System | Hangtyte Support System |
|---|---|---|---|
| Adjustable support pole grips the boat deck and cover via snaps or rubber caps Carver: 22"-70" Westland: 30"-57" |
Adjustable support pole inserted to vents in the cover Carver: 22"-70" Westland: 30"-57" |
Three-way strap supported by a single pole |
Support cover using the boat's tower with this clamshell, rope, and ratchet system |
| Ideal for wet weather | Ideal for hot, humid weather | Ideal for snowy weather | Ideal for wet weather |
| Multiple support poles required for covers over 14' long | Two systems needed for boats over 28' in length | Multiple systems may be used for larger boats | |
1 cup Vinegar
1 cup Borax
2 cups warm water
Mix and apply to mildew spots, letting it sit for no more than 10 minutes.
Scrub with a soft bristle brush and rinse well, allowing the fabric to dry completely.
¼ cup Dawn dish soap
1 gallon water
Fully wet the fabric and then scrub it down with a soft brush or cloth.
Give your boat cover a good rinse, and allow the fabric to fully dry.
Get tough spots clean with Fabric and Vinyl Cleaner.
Apply Fabric Guard to the clean, dry surface to protect your boat cover from the elements and extend its life.
Put in washer and dryer
Use powerful cleaners like bleach or detergent