Dive N Dog Stainless Steel "T-Style" Dive Ladder
The angled, solid center pole of this dive ladder provides a stable, stair-like ascent for easy boarding for divers and their gear.
- Ladder Material: 304 stainless steel step
- Material: Rubberized plastic cover, anti-skid ribs, flat oval rung, built-in end caps
- Mounting: Transom
- Weight Capacity: 300 lbs.
- Stowage: Flips up. Fixed dimensions
- Mount Attachment: Sold separately
- Note: Manufacturer's warranty requires the use of a back plate for installation
Boat Ladder Dimensions
3 Step
| 14"W x 34"L
| 14"W x 34"L x 4"D
| 11"
| 14"
| 2.38"
|
Measure for Fit
Locate the area on the transom where it will be best to mount your ladder. Measure the top of where you will be mounting the ladder to the top of the waterline and compare it with the length of the ladder to determine how far (or how many steps) the ladder will extend below the waterline. The more steps below the waterline the easier it will be to board.
For the width, measure the clearance width of the area on your transom where you will be mounting the ladder. Be sure to take into account the motor or any other accessories you have on the transom of your boat. This will let you know the maximum width your ladder can be.
Important Note
Backing plates or large washers are strongly recommended for all ladder installations. They will help distribute the load over a larger area to avoid potential damage. In some instances failure to use a backing plate may void the manufacturers warranty.