Dive N Dog Stainless Steel Telescoping Dive Ladder
The foot treads on this dive ladder are covered with a no-skid ribbing for comfortable, sure footing — even for divers wearing fins.
- Ladder Material: 304 Stainless Steel
Step
- Material: Rubberized plastic cover, anti-skid ribs, flat oval rung, built-in end caps
- Mounting: Swim platform. Transom, bow or under mount available with optional mounting brackets
- Weight Capacity: 300 lbs.
- Stowage: Steps telescope together. Ladder flips up and lies flat for compact stowage.
- Mount Attachment: Surface mount bracket included. Optional mounting brackets sold separately.
- Note: Manufacturer's warranty requires that a back plate is used for installation.
Dive Ladder Dimensions
2 Step
| 13.25"W x 23"L
| 13.25"W x 14.13"L x 2.38"H
| 11"
| 14" | 2.3*" |
3 Step
| 13.25"W x 33.5"L
| 13.24"W x 16.75"L x 3.25"H
| 11" | 14" | 2.3" |
Measure for Fit
Locate the area on your platform (or transom if using optional Transom Mount or side of the bow if using optional Quick Mount bracket) where it will be best to mount your ladder. Measure the top of where you will be mounting the ladder to the top of the waterline and compare it with the length of the ladder to determine how far (or how many steps) the ladder will extend below the waterline. The more steps below the waterline the easier it will be to board.
For the width, measure the clearance width of the area where you will be mounting the ladder. This will let you know the maximum width your ladder can be.
Important Note
Backing plates or large washers are strongly recommended for all ladder installations. They will help distribute the load over a larger area to avoid potential damage. In some instances failure to use a backing plate may void the manufacturers warranty.