Garelick EEZ-In Compact Fold-Down Transom Boarding Ladder
This transom
boarding ladder features comfortable non-slip oval-shaped aluminum steps that fold down for easy boarding and a poly strap to secure the ladder in the up position.
- Ladder Material: 1" diameter anodized aluminum tubing
- Step Material: Non-slip anodized aluminum
- Mounting: Transom
- Stowage: Steps fold up for stowage, poly strap secures ladder in up position
- Mount Attachment: 4 tube ends mount directly to transom. Tube rails can be easily cut to fit curved or angled transoms.
Boarding Ladder Dimensions
2 Steps
| 12"W x 15"L
| 12"W x 15"L
|
3 Steps
| 12"W x 25"L
| 12"W x 25"L
|
Measure for Fit
Locate the area of the transom where it will be best to mount your ladder. Measure the top of where you will be mounting the ladder to the top of the waterline and compare it with the length of the ladder to determine how far (or how many steps) the ladder will extend below the waterline. The more steps below the waterline the easier it will be to board.
For the width, measure the available width clearance where you will be mounting the ladder on the transom. Be sure to take in account the boat motor or any other accessories you will have on the stern of your boat. This will let you know the maximum width available for mounting your ladder.
Important Note
Backing plates or large washers are strongly
recommended for all ladder installations. They will help distribute the
load over a larger area to avoid potential damage. In some instances
failure to use a backing plate may void the manufacturers warranty.