Dive N Dog Stainless Steel Transom Ladder
This easy-to-install transom ladder is designed for small transoms but includes a wide step for comfortable boarding.
- Ladder Material: 304 Stainless steel
- Step Material: 304 Stainless steel with plastic tread with UV barrier
- Mounting: Transom
- Weight Capacity: 300 lbs.
- Stowage: Step flips up
Transom Ladder Dimensions
2 Steps
| 16"W x 12"L
| 16"W x 12"L
|
Measure for Fit
Locate the area of the transom where it will be best to mount your ladder. Measure the top of where you will be mounting the ladder to the top of the waterline and compare it with the length of the ladder to determine how far (or how many steps) the ladder will extend below the waterline. The more steps below the waterline the easier it will be to board.
For the width, measure the available width clearance where you will be mounting the ladder. Be sure to take in account the boat motor or any other accessories you will have on the stern of your boat. This will let you know the maximum width available for mounting your ladder.
Important Note
Backing plates or large washers are strongly
recommended for all ladder installations. They will help distribute the
load over a larger area to avoid potential damage. In some instances
failure to use a backing plate may void the manufacturers warranty.