Dive N Dog 4-Step Stainless Steel Folding Ladder
This boat ladder features two mounting style options, either flush on the side of the transom or on the top of the transom. Both styles use a keyhole mounting bracket so that the ladder can be easily removed.
- Ladder Material: Marine grade 304 stainless steel tubing
- Step Material: Non skid plastic tread with UV barrier over 304 stainless steel tubing
- Mounting: Transom
- Weight Capacity: 300 lbs
- Stowage: Folds in the middle and flips up for stowage. Ladder is removable
- Mount Attachment: Keyhole mounting brackets for either side mount or top mount
Side Mount Boat Ladder Dimensions
4 Step
| 14"W x 42.5"L
| 14"W x 24"L
| 9.45"
| 3.8" | 2 Steps Above Hinge
2 Steps Below Hinge
|
5 Step
| 14"W x 52.5"L
| 14"W x 34"L
| 9.45" | 3.8" | 3 Steps Above Hinge
2 Steps Below Hinge
|
Top Mount Boat Ladder Dimensions
4 Step
| 14"W x 44.75"L
| 14"W x 28"L
| 9.45"
| 6.8" | 2 Steps Above Hinge
2 Steps Below Hinge
|
5 Step
| 14"W x 56"L
| 14"W x 38.5"L
| 9.45" | 6.8" | 3 Steps Above Hinge
2 Steps Below Hinge
|
Measure for Fit
Locate the area on the transom where it will be best to mount your ladder. Measure the top of where you will be mounting the ladder to the top of the waterline and compare it with the length of the ladder to determine how far (or how many steps) the ladder will extend below the waterline. The more steps below the waterline the easier it will be to board.
For the width, measure the available width clearance where you will be mounting the ladder on the transom. Be sure to take in account the boat motor or any other accessories you will have on the stern of your boat. This will let you know the maximum width available for mounting a ladder.
Important Note
Backing plates or large washers are strongly recommended for all ladder installations. They will help distribute the load over a larger area to avoid potential damage. In some instances failure to use a backing plate may void the manufacturers warranty.