Dive N Dog Over Platform Ladder with Handle
This ladder mounts on the top of your swim platform, and comes with either 2, 3, or 4 telescoping steps that compactly stow flat on top of the swim platform.
Ladder Material: 304 stainless steel
Step Material: 304 stainless steel covered with non-skid plastic tread with UV barrier
Mounting: Swim platform
Weight Capacity: 300 lbs.
Stowage: Steps telescope closed and ladder lies flat on top of swim platform
Mount Attachment: Surface mount gudgeons (flip-up brackets).
Optional Mount Attachment: Quick mount brackets sold separately for removable mounting.
Platform Ladder Dimensions
2 Step
| 12"W x 23"L
| 12"W x 14"L
|
3 Step
| 12"W x 34"L
| 12"W x 16"L
|
Measure for Fit
Locate the space on your swim platform where it will be best to mount your ladder. Measure the top of where you will be mounting the ladder to the top of the waterline and compare it with the length of the ladder to determine how far (or how many steps) the ladder will extend below the waterline. The more steps below the waterline the easier it will be to board.
For the width, measure the available width clearance where you will be mounting the ladder on the swim platform. Be sure to take in account the boat motor or any other accessories you will have on the stern of your boat. This will let you know the maximum width available for mounting your ladder.
Important Note
Backing plates or large washers are strongly recommended for all ladder installations. They will help distribute the load over a larger area to avoid potential damage. In some instances failure to use a backing plate may void the manufacturers warranty.