AFI Swim Platform with Boat Ladder
This swim platform comes complete with a molded white poly swim platform, stainless steel handrails, mounting hardware, and a single step ladder that extends 14" below the platform in the lowered position.
- Ladder Material: Stainless Steel
- Platform Material: UV resistant molded polypropylene with anti-skid ribs and textured surface
- Mounting: Transom
- Stowage: Ladder folds over flat on top of platform
- Mount Attachment: Flush mount on transom. O/B mounting hardware can be switched from left to right-hand mounting as desired.
Boat Ladder Dimensions
| Outboard | 18"W
| 17"W | 15" | 14" |
| Inboard | 18"W | 17"W | 15" | 14" |
Measure for Fit
Locate the space on your transom where it would be best to mount your swim platform ladder. Measure the top of where you will be mounting the platform to the top of the waterline and compare it with the length of the ladder to determine how far the ladder will extend below the waterline. This will help you determine how close the ladder will be to the water.
For the width, measure the available width clearance where you will be mounting the platform ladder on the transom. Be sure to take in account the boat motor or any other accessories you will have on the stern of your boat. This will let you know the maximum width available for mounting your platform ladder.
Important Note
Backing plates or large washers are strongly recommended for all ladder installations. They will help distribute the load over a larger area to avoid potential damage. In some instances failure to use a backing plate may void the manufacturers warranty.