Quicksilver Typhoon Stainless Steel Prop Features
- 4-Blade
stainless steel propeller
- Designed for boaters seeking great acceleration and holding power
- Provides unbeatable acceleration/hole shot for serious tow-sports activities
- Over 5 times more durable
than an aluminum propeller
- High-polished stainless
steel finish
Fit the following 15 Tooth Spline Mercury and Mariner outboards
- 135 HP - 2-stroke or 4-stroke / 1987 & newer
- 150 HP - 2-stroke or 4-stroke / 1978 & newer
- 175 HP - 2-stroke or 4-stroke / 1978 & newer
- 200 HP - 2-stroke or 4-stroke / 1978 & newer
- 220 HP - 2-stroke or 4-stroke / 1987-1988
- 225 HP - 2-stroke or 4-stroke / all years
- 250 HP - 2-stroke or 4-stroke / 1994 & newer
- 275 HP - 2-stroke or 4-stroke / 1990-1994
- 300 HP - 2-stroke or 4-stroke / 1983 & 1999 and newer
Fits the following 15 Tooth Spline Mercruiser, Alpha One and Bravo One stern drives
- MERCRUISER I 120-190 HP
- Models 470, 485, 888, 898, 225S & 233
- MERCRUISER 200-280 HP Thru 1985
- Models 228, 255, 260, & 280TRS
- ALPHA ONE 1986 AND NEWER
- 2.5 Liter 120HP 1986-89
- 3.0 Liter 125-140HP 1986 & Newer
- 3.7 Liter 165-190HP 1986-89
- ALPHA ONE/BRAVO ONE 1986 AND NEWER
- Model 330TRS
- 4.3 Liter 155-250 HP 1986 & Newer
- 5.0 Liter 180-250 HP 1986 & Newer (Including 262 Mag)
- 5.7 Liter 210-320 HP 1986 & Newer
- 6.2 Liter 320 HP 2001 & newer
- 7.4 Liter 300-385 HP 1988 & Newer
- 8.1 Liter 375-425 HP 2001 & Newer
- 8.2 Liter 390-415 HP 1990 & Newer
- Including 350, 454, & 496 Mag. (under 400HP) & 320 EFI
Caution! Check for adequate blade tip clearance. If necessary, switch to high performance trim tab to allow adequate clearance.
Don't see your motor listed here? Use our
Boat Prop Finder to find the right
aluminum or stainless steel prop for your boat.
Why Buy a Quicksilver Boat Prop?
At the heart of every Quicksilver boat prop is the Flo-Torq hub system. The Flo-Torq hub system is specially designed to reduce slippage, yet still flex during engine shifting, the Flo-Torq cushions and protects the drivetrain from most impacts. Plus, the Flo-Torq System also provides
unmatched corrosion protection – giving you peace of mind and the freedom to
make the most of your time on the water.
Shift Shock -The Flo-Torq System is more flexible than competitive hub systems and thus minimizes stress on the engine, engine drive and propeller when the engine is
shifted into gear.
Breakaway - When large underwater obstructions are encountered, the drive sleeve of the
Flo-Torq System is designed to "break away" following impact, ensuring that
damage to the engine, engine drive and propeller is kept to a minimum. And
better yet, the sleeve can easily be replaced by you! Competing hub systems take
longer to break away after impact, increasing the risk of major damage to both
the engine and the drive.
Prop Sleeve - The Flo-Torq System uses brass and an
advanced, noncorrosive plastic that virtually eliminate any
opportunity for hub corrosion. In comparison, competitor systems use brass,
aluminum and plastic components – resulting in a higher probability that the
parts will corrode and fuse together. Thus making propeller replacement almost
impossible.
Learn more about selecting the right propeller pitch.