Kasco Marine Deicer Specifications
Boat deicers for boat protection
 Kasco Marine Deicers have been in production for over 40 years and have been tested in a wide range of environments. Whether you're saving whales in the arctic, or trying to keep water open for wild waterfowl in Nebraska, protecting your boat and dock from ice damage or improving summer water quality in a marina, Kasco has been there. Kasco engineers have applied this experience to build marine deicer units that are tough and dependable, meeting the demanding tasks they are asked to perform, while being as energy efficient as possible. It is little wonder that Kasco is a leading name in the boat de-icer and water circulation field.
Kasco boat deicers are available in 1/2, 3/4 and 1 HP models. The larger units are available with an HD 220 volt motor. The table below compares the units power output and power requirements, while the table titled "Kasco Marine Deicer Typical Ice Clearing" outlines an average area expected to be cleared under different temperature conditions.
Kasco Marine De-icer Power Specifications |
|
Kasco De-icer Model |
Horse Power |
De-icer Thrust |
Voltage |
Operating Amps |
|
|
.5 HP |
26 lbs. |
110-120 volt |
5 @ 120V |
|
|
.75 HP |
34 lbs. |
110-120 volt |
6.7 @ 120V |
|
|
.75 HP |
34 lbs. |
208-240 volt |
3.4 @ 240V |
|
|
1 HP |
52 lbs. |
110-120 volt |
11.3 @ 120V |
|
|
1 HP |
52 lbs |
208-240 volt |
5.7 @ 240V |
When suspended at an angle, whether you are using the suspension lines, the Dock Mount kit or the Float Mount kit, your boat deicer will form an elliptical pattern of ice clearance. When it is mounted vertically, it will produce a roughly round area of cleared ice. These units work by drawing warmer water from the depths of the water body, and circulating it to the surface. because of this, there are a number of factors that will impact how effective the marine de-icer is. If the water body is fairly shallow with consistent water temperatures, or there are obstructions that impede water flow, the deicing will be less effective. Outside weather conditions may also increase or decrease the potential for freezing under any given set of circumstances.
Kasco Marine De-icer Typical Ice Clearing |
|
Avg. Low Temp.
34º to 20ºF |
Avg. Low Temp.
19º to 0ºF |
Avg. Low Temp.
-1º to -20ºF |
Great Lakes Region |
| De-icer HP |
Angled |
Vert. |
Angled |
Vert. |
Angled |
Vert. |
Angled |
Vert. |
| 1/2 HP |
30 ft. X 100 ft. |
65 ft. |
25 ft. X 60 ft. |
50 ft. |
25 ft. X 50 ft. |
45 ft. |
20 ft. X 40 ft. |
35 ft. |
| 3/4 HP |
35 ft. X 120 ft. |
85 ft. |
30 ft. x 80 ft. |
70 ft. |
30 ft. X 75 ft. |
65 ft. |
25 ft. X 50 ft. |
45 ft. |
| 1 HP |
40 ft. X 150 ft. |
95 ft. |
35 ft. X 90 ft. |
80 ft. |
35 ft. X 85 ft. |
75 ft. |
30 ft. X 60 ft. |
55 ft. |
Assumption: Unobstructed water; 200 acre plus body of water with at least 20 ft. of depth. Water depth in the de-icing area is 4 ft. plus. clearing size may vary greatly based on a number of local conditions. 
-
Stainless Steel Safety Cage - for propeller protecton - vinyl coated for easy handling.
-
Performance Propellers - Specially pitched for maximum thrust and minimum poser usage.
-
Power Cable - Water and oil resistant power cable with cold weather flexibility to -50º F. Exterior water-tight connection for easy on-the-spot replacement. available in 25 ft., 50 ft. and 100 ft. lengths
-
Zinc Anode - Renewable Anode to protect against corrosion frm electrolysis.
-
Seals - Kasco dual-sealed system. Hard face internal mechanical seal and outside lip seal for double protection against oil leaks.
-
Oil - large capacity dielectric oil provides lifetime lubrication, maximum cooling and protection against failure due to moisture contamination
-
Motor - Custom designed, continous duty 120V single phase, oil immersed and overload protected with fully automatic reset. Motor exceeds NEMA Specifications.
-
Capacitor - Permanent split capacitor (PSC) insures quick high torque starts and smooth operation.
-
Motor Housing - Corrosion-resistant Stainless steel, a must for salt water operation
|
