Rubex 4 Aluminum Prop Features:
- Wide blade design specifically for 4-stroke engines
- Increased static thrust for heavy loads and maneuverablity
- Great stern lift and mid-range performance
- Recommended for heavy loads
Rubex Hub Kit Features- One piece construction
- Anodized aluminum splines
- Interchangeable with Flo-Torq and Vortex systems
- Eliminate hub chatter and vibration
- Rubber hub design, no plastics to deteriorate
|
- Softer shifting and reduce propshaft shock
- Hub will not spin in propeller
- Reusable if propeller is damaged
- Does not require periodic re-torquing
- All necessary hardware included
|
Fits the following Evinrude, Johnson & BRP motors
- 100 HP V4 Commercial / 1984 & newer (15 Tooth)
- 140 HP 2-Stroke / 1989-1994 (15 Tooth)
- 150 HP V6 / 1978 & newer (15 Tooth)
- 155 HP V6 Commercial / 1978 & newer (15 Tooth)
- 175 HP V6 / 1977 & newer (15 Tooth)
- 185 HP V6 / 1984-1985 (15 Tooth)
- 200 HP V6 /1976 & newer (15 Tooth)
- 225 HP V6 / 1986 & newer (15 Tooth)
- 235 HP V6 / 1978-1985 (15 Tooth)
- 275 HP V8 / 1986-1988 (15 Tooth)
- 300 HP V8 / 1986-1995 (15 Tooth)
- 120 HP V4 /1985 (15 Tooth)
- 140 HP V4 /1985 (15 Tooth)
- 3.6 Liter V-8 All / 1986-1987 (15 Tooth)
Fits the following OMC Stern Drives
- OMC Model 800
- OMC King Cobra (Non-SX)
- OMC Cobra / 1978 & newer (15 tooth)
- OMC Sea Drive 2.0L - 4.0L (15 tooth)
- 2.6 Liter V-6 All / 1984-1985 (15 Tooth)
Important Note: 1991 and newer motors require alternate hub kit
RBX100
Don't see your motor listed here? Use our
Boat Propeller Finder to find the right aluminum or stainless prop for your boat.
Rubex Propeller System
A rubber interchangeable hub system is used in every
Rubex stainless steel or aluminum propeller. The Rubx hub is designed to eliminate chatter and
vibration that competitive plastic hub systems are prone to. It can deflect 10% for softer shifting and to
reduce propshaft shock when the propeller strikes a submerged object and will not spin in the propeller. The Rubex
hub can be reused if the propeller blade is
damaged and needs to be replaced. Each Rubex hub kit comes with the hardware needed to
install the propeller on the propshaft. Unlike competitive hubs, the prop nut
does not require periodic re-torquing on a Rubex propeller system.
What people are saying about their Solas boat prop:
Great quality product
Great quality product. I would recommend it to everybody that needs to replace their current boat propeller!
Author: L.Clark
Great upgradeWith the 3 kids and myself in my 16' aluminum boat my 15 hp Evinrude would top out at about 5000 rpm (redline = 6500). Outboard manual said to go for a lower pitch (factory = 10") so I bought this prop. Easy install, now with boat loaded with kids and fishing gear the motor hits ~6300 rpm and by myself I now have to watch I don't go over redline. Very happy with propeller. Would definitely buy again. Fast shipping, no issues at all.
Author: J. Austin
Works great for meIt was a very high-quality and an inexpensive prop. Works great for me.
Author: M. Green
Prop looks great
I'll start by saying that I haven't had a chance to run this prop yet, but I have unboxed it and installed. Prop looks great and I expect it to last a long time. Hard for me to rate this product without using it yet but I'll give Savvyboater 5 stars!
What I definitely can say is Savvyboater was extremely fast getting this product shipped. I had it on my doorstep before I was expecting it. I WILL be doing business with Savvyboater in the future!
Author: J. King
I would not go to any other dealerThank you very much for the great service I received from you people. If at any time I needed a part for my boat I would not go to any other dealer. The time of shipment was great. The prop arrived in great condition. I have told all my friends how pleased I am with your company. Thanks again!
Author: F. McMahon
Great productThe prop arrived promptly and in great condition. The quality looks great!
Author: J. Byer
Got a great priceAwesome. I received my prop in 3 days, got a great price, and free shipping! Very satisfied!
Author: S. Minc
Very fast shippingEasy product identification. Very, very fast shipping. Ordered on a Thursday and was on my doorstep Friday afternoon.
Author: J. Goines
Great prop and it shipped fastWe run a 15' Alumacraft flat bottom with a 20 hp Mercury 4-stroke outboard near the coast we bought one of these and wow what a prop. This bad boy is faster on plane stays on plane longer and all around faster than any three blade we have. Our boat is decked out and heavy no problem for this prop. With one person it runs out at 27 mph. Can someone tell Mr. Solas we want a 9.25"X10"X 14 spline 4 blade stainless steel that would be the prop of all props!
Author: J. Austin